Skip to main content

Set up Character Tags and Object Tags in Segwise

Set up Character Tags and Object Tags in Segwise: upload reference images of a mascot, person, product or logo and Segwise finds it in your creatives.

M
Written by Mohamed Shayan

Character Tags and Object Tags find a specific character, mascot, person, product or logo across all your creatives. You upload a few reference images, and Segwise tags every creative where it appears, so you can compare how ads with and without it perform.

Character Tags vs Object Tags

  • Character Tags recognise familiar faces and personalities, such as your mascot, a game character or a presenter, by matching against your reference library.

  • Object Tags identify key products and objects, such as an in-game item, a product or your logo, by comparing against your reference images.

Both are set up the same way in Settings > Set up AI Tags.

How to set up Character Tags

  1. Go to Settings > Set up AI Tags and click + Add characters on the Character Tags card.

  2. Turn on the Enable Tag toggle.

  3. Under Add Values/References, enter the value name, for example the character's name.

  4. Upload up to 10 reference images for that value. Each image must be smaller than 2 MB. Upload several angles for the best results.

  5. Add more values if you want to track more characters.

  6. Click Update.

Character Tags setup: Enable Tag toggle, a value name and uploaded reference images, then Update

Name each character, upload reference images from several angles and click Update.

Choose when tagging starts

After you click Update, Segwise asks How would you like to begin?

  • Start from Tomorrow – tag creatives from the next daily run onward.

  • Backfill from starting – also tag your existing creatives for the date range shown.

Click Continue. You'll see Assets updated successfully.

How would you like to begin? dialog with Start from Tomorrow and Backfill from starting, and Continue

Choose Start from Tomorrow or Backfill from starting, then click Continue.

How to set up Object Tags

Click + Add objects on the Object Tags card and follow the same steps: turn on the tag, name each object (for example "Dice"), upload up to 10 reference images under 2 MB, click Update and choose when to start.

Object Tags page with the tag toggle, a value named Dice and the Upload upto 10 References area

Name each object and upload up to 10 reference images.

Where to see the results

Once tagging has run, the tag shows on matching creatives, for example Characters = your mascot. Open a creative and click View tags to see it under All Tags, add it to a report with + Add Tags, or group by it in a Tags Report.

Related articles

Did this answer your question?